RadAl™-1 Radiation Monitor and Alarm

cost-effective protection against radiological risk

L.Q.C. sl

Girona 72 bx
17130 La Escala, Spain
Tel + 34 902 889 342
Fax + 34 972 774 387
info@radal.com

Common Specifications:

Detectors

Geiger-Müller tube(s), L= 230 mm, D = 20 mm (9" x 0.75")

Sensitivity

12 cps/µGy/h/tube = 12 cps/µGy/h/tube = 120 cps/mR/h/tube

Alarm Level

Automatic, as low as 20 nGy/h (2 µR/h)

Response Time

Automatic, from1 seconds to 10 minutes

Alarm Modes

Latching and non-latching, field selectable

Calibration

Automatic, uses ambient background

Radiation Detected

X-Ray and Gamma > 25 keV; peak sensitivity at 60 keV

Inputs

1 - Key on/off          2 - Key calibrate

Outputs

3 Status LEDs:  green - ON   yellow - COUNT    red - ALARM
Buzzer (can be disabled): 80 dBA @ 30 cm (1 ft)
Relay, SPDT, 10 A, 380 Vac, 2500 W, non-inductive load

Communications

RS-232-C or RS-485 1/4 load, field selectable
Protocol: 9600 baud, 8 bits, No parity, 1 stop bit

Power Supply
(field selectable)

¤   230 Vac (nominal), 50 - 60 Hz (with 100 mA fuse);
¤   115 Vac (nominal), 50 - 60 Hz (with 100 mA fuse)
¤   12 ± 3 Vdc

Power Consumption

1.5 W average, 3 W peak

Temperature Range

Operation:  -25... 85  °C (-13... 185 °F)
Storage:    -40... 125 °C (-40... 257 °F)

Warranty

One year all parts and labor

Applicable Standards

FCC Part 15 (Class B); EN 50081-1, EN 50082-1 (CE label)

for interiors

for exteriors

RadAl™-1

0... 95% RH, non-condensing

humidity
range

0... 100% RH

RadAl™-1-WP

for interiors

Black Anodized Aluminum

(other colors on demand)

Housing

fiberglass reinforced polyester

 for exteriors

110 x 400 x 60 mm
= 4.35 x 15.75 x 2.37"

Dimensions
(WHD)

445 x 393 x 158 mm
= 17.52 x 15.46 x 6.23"

Instrument
1.4 Kg = 3.0 LBS
Shipping:
2.0 Kg = 4.2 LBS

Weight

Instrument:
8 Kg = 17 LBS
Shipping:
10 Kg = 21 LBS

IP54

Protection

IP 67
NEMA 4
UL Listed

Specifications are for models with one GM tube. Models with 4 GM tubes (RadAl™-1/4 and RadAl™-1-WP/4 have twice the sensitivity and speed.
Connections to relay and communication ports are by  terminals accessible through wall passages.
Computer programs can be provided to demonstrate and test communications.
A detailed report: "sensitivity tests using Am241 and Cs137 sources " is available documenting alarm response thresholds.
No toxic nor radioactive materials are used in these instruments!

info@radal.com

<back

©1997-2019 L.Q.C. sl